Below are pictures of some boards that were made and painted by us.
All of the boards made by or used by us follow the equipment specifications and standards set by the American Cornhole Association.
1. Each cornhole board is a 48″ x 24″ rectangle made of half inch plywood. Winchester Va Cornhole sanctioned tournaments are only played with wooden cornhole boards as there is significant variance in play between wooden and plastic or other surfaces.
2. The hole in the cornhole board is six inches in diameter and is centered nine inches from the top and 12 inches from each side of the cornhole board edges.
3. The front of the cornhole board is approximately 4 inches from bottom to top and be at near a 90-degree angle to the ground.
4. The back of the cornhole board is approximately 12 inches from bottom to top and be at near a 90-degree angle to the ground.
5. The cornhole board should have solid wood sides with the only opening to the underside of the cornhole board being through the hole in the cornhole board.
6. The Cornhole board playing surface should be sanded to a very smooth texture and there should not be any blemishes in the wood surface that might disrupt or distort play.
7. The Cornhole board playing surface should be painted with a high gloss latex paint resulting in a surface that allows corn bags to slide but is not so slippery that it allows the bags to slide back down the platform. The preferable color is white, but any easy to see color is acceptable for tournament play.
8. The corn bags are made from two fabric squares with a quarter inch double stitched seam on all four sides. The corn bags should be made from 12 oz / sq yd duck canvas and may be any color that is easy to see during Cornhole play. Each bag shall be filled with approximately 2 cups of corn feed and finished bags should be a minimum of 6″ X 6″ square and weigh between 14 and 16 ounces.
